Troubleshooting

If your upgrade from Octopus 2.6 to Octopus 2018.10 LTS doesn’t go smoothly, this page will help you find a solution. If this page doesn’t help, contact support.

Rolling back

The Octopus 2.6 to Octopus 2018.10 LTS upgrade is lossless, meaning you shouldn’t lose any data as a result of installing the new MSI. Your Raven database and configuration settings are not deleted.

If your number one priority is to get up and running again, you can simply run the Octopus 2.6 MSI again, and the previous version will install over the top of 2018.10 LTS, allowing you to diagnose the issue at your leisure.

Hydra log files

Hydra writes to two log files during its deployment.

The first is located in the folder that the Hydra package is unpacked to on deployment. It’s named upgradelog.log and will write details about what Hydra is doing during an upgrade.

The second log is also in the Hydra package directory. It has a random filename and is used purely as an output for the MSI installation process. Hydra will delete this file if it detects a successful install. If the file is present, this means the installation has probably failed.

You can also refer to the Windows Event Log as well as Scheduled Tasks for more information on the installation process. Note that the Scheduled Task will expire after 5 min, and the results may no longer be available.

Common issues

This section describes some common upgrade issues and ways to resolve them.

Tentacle does not upgrade properly

Symptoms #1

The Octopus 2018.10 LTS server cannot communicate with one or more Tentacles.

You may see an error similar to the following in the Server logs:

Halibut.Transport.Protocol.ConnectionInitializationFailedException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   --- End of inner exception stack trace ---
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count)
   at System.Net.Security._SslStream.StartFrameBody(Int32 readBytes, Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslStream.Read(Byte[] buffer, Int32 offset, Int32 count)
   at System.IO.StreamReader.ReadBuffer()
   at System.IO.StreamReader.ReadLine()
   at Halibut.Transport.Protocol.MessageExchangeStream.ReadRemoteIdentity() in y:\work\7ab39c94136bc5c6\source\Halibut\Transport\Protocol\MessageExchangeStream.cs:line 124
   at Halibut.Transport.Protocol.MessageExchangeStream.ExpectServerIdentity() in y:\work\7ab39c94136bc5c6\source\Halibut\Transport\Protocol\MessageExchangeStream.cs:line 187
   at Halibut.Transport.Protocol.MessageExchangeProtocol.PrepareExchangeAsClient() in y:\work\7ab39c94136bc5c6\source\Halibut\Transport\Protocol\MessageExchangeProtocol.cs:line 41
   --- End of inner exception stack trace ---
   at Halibut.Transport.Protocol.MessageExchangeProtocol.PrepareExchangeAsClient() in y:\work\7ab39c94136bc5c6\source\Halibut\Transport\Protocol\MessageExchangeProtocol.cs:line 51
   at Halibut.HalibutRuntime.<>c__DisplayClass6.<SendOutgoingHttpsRequest>b__5(MessageExchangeProtocol protocol) in y:\work\7ab39c94136bc5c6\source\Halibut\HalibutRuntime.cs:line 115
   at Halibut.Transport.SecureClient.ExecuteTransaction(Action`1 protocolHandler) in y:\work\7ab39c94136bc5c6\source\Halibut\Transport\SecureClient.cs:line 60

And an error such as the following in the Tentacle logs:

2015-07-20 12:04:52.2324      7 ERROR  Invalid request
System.Net.ProtocolViolationException: Request line should have three parts
   at Pipefish.Transport.SecureTcp.ProtocolParser.ParseRequest(Stream clientStream, Method& method, Uri& uri, RequestHeaders& headers, String& protocol) in y:\work\3cbe05672d69a231\source\Pipefish.Transport.SecureTcp\ProtocolParser.cs:line 50
   at Pipefish.Transport.SecureTcp.Server.SecureTcpServer.ApplyProtocol(AuthorizationResult authorizationResult, EndPoint clientEndPoint, String clientThumbprint, Stream clientStream) in y:\work\3cbe05672d69a231\source\Pipefish.Transport.SecureTcp\Server\SecureTcpServer.cs:line 141

Solution #1

If you see a reference to Halibut in the server log and Pipefish in the client log, that’s an indication that the Tentacle is still using 2.x binaries.

The easiest way to fix this is to RDP into the Tentacle machine and click the Reinstall button. This will reset the Tentacle service to make sure it points to the new binaries. Be aware that this will reset the Tentacle service account to run as Local System. If you are using a custom service account, you will have to reconfigure it.

Symptoms #2

The Octopus 2018.10 LTS Server cannot communicate with the Tentacle. When investigated, the Windows Service for the Tentacle is pointing at a 2.6 instance of the Octopus Tentacle.

Solution #2

There are a few potential reasons for this:

  • The MSI upgrade failed. If this is the case, you will be able to find a log file with a random filename in the Hydra package directory on the Tentacle server. It should show reasons for the MSI failure.
  • The MSI upgraded the Tentacle, but the Windows Service is pointing at an old version.

If an upgrade succeeded but the Windows Service is still running the 2.6 instance, you will have to click the Reinstall link as per the Solution #1 above.

If the upgrade itself failed, this can be due to a previous installation of a 2.0 version of the Octopus Tentacle (which was fixed in 2.1). Originally, the MSI installed itself on a per-user basis rather than per-machine. This means that Hydra is unable to uninstall the previous version prior to installing the latest version of Tentacle.

In this case, you will have to log onto your Tentacle machine as the user who first installed the 2.0 version of the Tentacle. You can then either run Hydra.exe directly, or manually uninstall the previous Tentacle and install the latest version of Tentacle.

I’ve lost all my NuGet packages

Symptoms

After migration, none of the NuGet packages that were present in the internal feed are available.

Solution

NuGet packages are not included in the Raven database backup, so will not be automatically moved to your new server and to the correct location.

To move your NuGet packages, follow the instructions in the Upgrade documentation. After moving the files and restarting the service, your packages should be reindexed and available.

Help us continuously improve

Please let us know if you have any feedback about this page.

Send feedback

Page updated on Sunday, January 1, 2023